- 30 xOEL protection level
- 0.6 mbar breath resistance
- Valve
- CE Certified
- Complies with EN 149:2001+A1:2009 standards.
According to the European Union Personal Protective Equipment, EN 149: 2001 + A1: 2009.
FFP1 Provides 80% protection against water and oil-based harmless dust and moisture
FFP2 Provides 94% protection against water and oil based harmless dust and moisture and smoke
FFP3 Provides 99% protection against water and oil-based harmless dust and moisture and fumes, some viruses, micro-biological environments and the pharmaceutical industry
Suitable Application Areas
Construction / Shipbuilding / Pharmaceutical Industry / Rubber Plastics / Engineering / Iron Steel / Agrochemicals / Laboratories / Agriculture / Base Metal Production / Lightweight / Coal Mining
Construction / Shipbuilding / Pharmaceutical Industry / Rubber Plastics / Engineering / Iron Steel / Agrochemicals / Laboratories / Agriculture / Base Metal Production / Lightweight / Coal Mining
Check the selected mask before entering it.
As in Figure 3, take a breath and test for leaks.
If there is a leak, perform the reassembly operation as shown in figure 1-2-3-4.At least 19.5% oxygen should be present in the study area. Otherwise, the mask cannot be used.
Do not use the mask in places such as airless wells, warehouses and warehouses where there is not enough oxygen.
Masks do not provide protection against gas and steam.
Immediately replace the mask as soon as there is a significant level of breathing resistance to the working environment.
For protection against solids and liquid aerosols.
Do not use against volatile aerosols.
Select the appropriate degree of protection.
Not used in explosive areas.
Single use.
Must be discarded after use.
The masks are disposable. However, the service life may be reduced depending on the characteristics of the working environment and the humidity. For your safety, it is recommended to replace with a new one if the breathing resistance increases.